Campbell Scientific PConnect Software for Palm™ OS PDAs - Manual (Page 21)

PConnect for the Palm Handheld
Flags/Ports
The datalogger's flags and ports can be viewed and toggled from the
Flags/Ports window. All of the flags and ports in the datalogger are displayed
on the screen. If a flag or port is High, a check mark will appear in the box
beside the flag or port. If a flag or port is Low, the box will be empty.
To change the state of a flag or port, touch the box for that flag or port. There
may be a short delay between when the box is touched and when the state of
the flag or port appears to change.
In addition, Flags and Ports for CR510PB, CR10XPB, and
CR23XPB dataloggers can be viewed and toggled from the
Measurements window. NOTES
CR200 Series dataloggers do not have Flags or Ports which can
be toggled.
Flags are displayed for the CR1000, CR800/850, or CR3000
only if the datalogger program has a Public variable array
defined, with the name of flag (i.e., Flag (4)).
15