Campbell Scientific PConnect Software for Palm™ OS PDAs - Manual (Page 22)

PConnect for the Palm Handheld
Terminal
When Terminal is selected, the remote communications command is sent to the
datalogger and it is put into a remote communications state. This state allows
the user to send telecommunications command directly to the datalogger and is
typically used for trouble-shooting.
Touch abc for
Palm keyboard
For all dataloggers except the CR1000, CR200, CR800/850, and CR3000, the
datalogger's keyboard/display keypad is depicted on the Terminal window.
The Palm device's grafitti pad or keyboard can also be used to enter characters.
For CR1000, CR800/850, CR200, and CR3000 dataloggers, there is no
keyboard/display depicted, so the graffiti pad or keyboard must be used.
For mixed array dataloggers, to return the datalogger to its program execution
state, enter *0. LOG1, LOG2, or LOG12 should be displayed indicating that
the code in program table 1, and/or program table 2, is being run. PakBus
dataloggers do not need to be returned to a logging state.
Terminal mode should be used with caution since it is possible to delete
instructions in the datalogger's program or delete data from the datalogger
while in this mode. Refer to the datalogger's user manual for complete
information on the remote communications mode.
16