Campbell Scientific PONDVIEW Real-Time Monitoring & Control Software - Manual (Page 19)

2-1
Section 2. PondView Display Screen
2.1 Enable the Display
PondView is activated by selecting Start|Programs|PondView.
When PondView is first started, please be patient. The initialization may take
a few minutes.
2.2 Overview Page
The Overview Page provides a quick summary of the dissolved oxygen
readings in each pond. Ponds are arranged in sections corresponding to the
stations that monitor the pond. Each station group includes a time stamp of
when the data was collected.
In addition to the dissolved oxygen value, an alarm light is displayed along the
right side of each DO value. If the alarm condition occurs, the light will be
red; if the alarm is not active, then the light will be green.
A smaller light will be displayed along the left side of the pond label. This
alarm light represents communication of the remote buoy to the monitoring
station. A green light indicates successful communication between the buoy
and monitoring station. A red light indicates communication has been lost.