Campbell Scientific PONDVIEW Real-Time Monitoring & Control Software User Manual
Page 32
Advertising
Section 6. DO Probe Calibration
6-2
is to be calibrated. Enter the value obtained using the hand dissolved oxygen
meter. Press the Enter key on the PC keypad to send this new value to the
CR10X-TD. Once all of the corrected values have been entered into the edit
boxes, click the calibration status button with the right mouse. Select Turn On.
The CR10X-TD will remain in the Hand Calibration mode for 30 seconds,
after which it will automatically return to the Normal operation mode.
Advertising