Campbell Scientific RavenXTV CDMA Sierra Wireless Cellular Modem - Manual (Page 9)

RavenXTV CDMA Sierra Wireless Cellular Modem
Dimensions
Width: 7.6 cm (3 in)
Depth: 2.5 cm (1 in)
Length: 10 cm (4 in)
Weight: <0.5 kg (<1 lb)
4. Configuration
4.1 Base Station Requirements for RavenXTV
PC running Campbell Scientific’s LoggerNet or PC400 software, with access
to the Internet.
4.2 Datalogger Site Equipment
• Raven modem with power cable (included with modem).
• Datalogger—21X, CR510, CR10(X), CR23X, CR7, CR1000, CR5000,
CR3000, CR800.
• Modem Interface
If connecting to CS I/O port:
SC105 or SC932A Interface—connects the modem to the 21X,
CR510, CR10(X), CR7, or other dataloggers’ CS I/O port.
The SC105 must be configured for use with the modem using the
Device Configuration Utility. Settings should be:
CS I/O Mode: SDC Address 7
RS-232 Mode: Modem
Baud Rate: 115.2K or 9600 baud depending on datalogger model
8 data bits, 1 stop bit, no parity
If connecting to RS-232 port:
PN 18663 Null Modem Cable—connects the modem to the
CR23X, CR3000, CR800, CR2XX, CR1000, or CR5000 RS-232
port.
• PN 14394 Raven Mounting Kit—includes mounting hardware for securing
the modem to below-referenced environmental enclosure and a 9-pin male
to 9-pin female cable.
• Antenna—the following antennas are available from Campbell Scientific.
Contact a Campbell Scientific applications technician for help in
determining the best antenna for your application.
o The 20679 is a dual-band, omnidirectional antenna for our CDMA
and GPRS digital-cellular modems. It covers both the 800-MHz band
and the 1.9-GHz band. For the 800-MHz band, the 20679 provides a
3