Campbell Scientific RF310, RF312, RF313 Narrowband Radios - Manual (Page 10)

Section 1. General Radiotelemetry Network
1-4
815 W. 1800 N. Logan Utah 84321-1784 (801) 753-2342 FAX (801) 750-9540 Copyright(c) 1996
Setup Instructions: Disk 1 of 4
1. Start Microsoft Windows
2. Insert Disk 1 in drive A.
3. From Program Manager, select File menu and
choose Run
4. Type a:\setup and press ENTER.
Datalogger Support Software for Windows
PC208W
To Antenna
RS232 Cable
CARRIER DETECT
RF310B
RF BASE STATION
POWER
ON
MADE IN U.S.A.
FIGURE 1-3. An RF Telemetry Base Station
1.4 Repeater
Purpose: To act as relay between two communicating stations separated by
too long of a distance or an obstacle which impedes direct
communication. A repeater is not always required in an RF
telemetry network. A field station can also function as a repeater.
Equipment Required:
• Radio
• RF Modem
• Antenna and antenna cable
• 12 V and 5 V power supply (PS512M or CH512R and BP12)
• Enclosure and other mounting needs