Campbell Scientific SDM-CD16S 16-Channel Solid State DC Relay Controller Module - Manual (Page 22)

SDM-CD16S 16 Channel Solid State DC Control Module
'CR1000 Series Datalogger
'CR1000 Wiring:
'SDM Connections
'C1
SDM Data (green)
'C2 SDM Clock (white)
'C3 SDM Enable (brown)
'G SDM reference (black)
' SDM shield (clear)
'+12 Not Connected (Red)
PipeLineMode
Dim SiteSequence(10) As Long
'The sequence consists of 10 valve settings
Dim SiteValve(8) As Long 'There are 8 valve settings in the above sequence
Dim SiteValveCD16 As Long 'This is the variable that is used to set the SDM-CD16
Dim AvgDisable As Boolean
Public EndOmit As Boolean
Public SeqActiveFlag As Boolean
'Set false to disable auto site switching
Public Site As Long
Public SiteOutput As Long
Public Count As Long
Public SeqIndex As Long
'Variables for Measurements
Public GasConc(2)
'Variable that controls valve switching and averaging periods
Const OmitCounts = 10
Dim I As Long
Dim One
DataTable (RawData,True,-1)
DataInterval
(0,0,Sec,10)
CardOut (0 ,-1)
Sample (1,Site,IEEE4)
Sample (1,Count,IEEE4)
Sample (1,SeqActiveFlag,IEEE4)
Sample (2,GasConc(1),IEEE4)
EndTable
'Site Table, output each time a site is completed.
18