Campbell Scientific SDM-IO16 16-Channel Input/Output Expansion Module User Manual
Sdm-io16 16 channel input/output expansion module
Advertising
Table of contents
Document Outline
- Revision and Copyright Information
- Warranty and Assistance
- IMPORTANT -- Please Read First
- Table of Contents
- SDM-IO16 16 Channel Input/Output Expansion Module
- 1. Introduction
- 2. Specifications
- 3. Power Considerations
- 4. Installation
- 5. Address Selection Switches
- 6. Programming the Datalogger
- 7. Program Examples
- 7.1 SDMIO16 Example
- 7.2 A CR10X Program Using the Outputs for Control of a Greenhouse Heating and Cooling System.
- 7.3 A CR10X Program which Measures Four Frequency Inputs (Anemometers) and Four Switch Closure Inputs (Rain Gauges)
- 7.4 A CR10X Program that uses the Interrupt Subroutine in the Datalogger to Record the Time of Change of any one of the Ports on an SDM-IO16
- Appendix A. General Principles of Pulse and Frequency Measurements
- Appendix B. Command Code Listing
- Campbell Scientific Contact Information