Campbell Scientific VS1 Telephone Modem with Voice Synthesizer - Manual (Page 15)

VS1 AND VOICE SYNTHESIZER EDITOR
13

To select a line to edit, place the mouse
cursor on the line you wish to edit. Click
the left mouse button once to highlight
the line to select it, then quickly double
click the mouse button while the mouse
cursor is still on the highlighted line.
If the line of text you want is out of the
present window, place the mouse
cursor on the window frame on the
bottom or on the right hand side and
click the left mouse button. The
highlighted area should jump to another
line of text.
To scroll through the lines of text, place
the mouse cursor on either the arrows
on the bottom frame, or the arrows on
the right frame of the editing window.
Then click and hold the left mouse
button. Release it to stop scrolling. By
clicking the arrow icons you can single
step through text lines.

To select a line to edit using the
keyboard use the up or down arrow
keys to highlight different lines. To scroll
quickly through the selections press
and hold the up or down arrow key. To
stop scrolling release the key. If the
text line you are looking for is out of the
present window use <PgUp> and
<PgDn> to move through the text
entries faster and then use the arrow
keys to get to the exact line you want.
After you have highlighted the line you
wish to edit, press <Enter> to select it.
Notice the highlight bar can be moved
past text and into blank areas. Also
notice on the bottom and on the right-
hand side of the editing window the
frame has a different texture than on
the top or the left hand side. On both
frames there is a small rectangle with a
solid circular dot in the middle of the
rectangle. As you move the highlight
bar down through the text area the
rectangle on the bottom will move from
left to right and the rectangle on the
right hand side will move from top to
bottom. These rectangles identify
approximately where you are in the text
area and are used with the mouse to
move through the text area.

With the top line of EXMPL1.DLD
highlighted, place the mouse cursor on
the top line and click the left mouse
button once to highlight it and then
quickly double click the mouse button
again to select it for editing.

Use the arrow keys to move around in
the editing window to higlight the line to
be edited. Highlight the top line and
press <Enter> from the keyboard to
select the line for editing.
An editing window will appear in the middle of
the computer screen. From this window you can
do all the creation and editing of your
messages.

To use a mouse place the mouse
cursor on the option you want and click
the left mouse button once.

Use the <Tab> key from the keyboard
to move through the various fields and
<Enter> to select an option.
Notice the "Initial Message" box has an
"X" checked in it. This particular input
location has been flagged to be heard
in the initial message. Clicking on the
box with the mouse or pressing the
space bar will cause this box to be
checked or unchecked.
Next to the "Initial Message" area is "Decimal
Places: 4". The VS1 will speak from 0-5 digits
past the decimal. Sometimes you don't need all
the decimals spoken. "Decimal Places" is user
settable from zero to five digits spoken past the
decimal. The default is five.
Click on "Decimal Places" with the mouse or
<Tab> over to "Decimal Places" with a
keyboard to activate it. Type in <2>.

To exit this field with a mouse, click on
another field or click on OK.