Campbell Scientific VS1 Telephone Modem with Voice Synthesizer - Manual (Page 34)

G-1
APPENDIX G. HELP, INFORMATION, AND ERROR MESSAGES
HELP MESSAGES
HELP 0001:
A *.DLD file has not been opened at this time.
Please open a file using the NEW FILE
command in the FILE menu.
HELP 0002:
This screen is a listing of all the strings for input
locations, ports, and flags, that are in the *.DLD
file.
If the voice strings have not been created this
screen will be blank. Some keys have special
uses in this screen. They are as follows:
Enter: Invokes the editing window for the line
highlighted.
F1: Invokes Help screens.
F3: Deletes the highlighted line.
F4: Inserts a line before the highlighted line.
F5: Enlarges the editing screen to full size.
F6: Invokes the Initiate Call Flag window.
The user can then specify the flag and
telephone number for call.
NOTE: Initiate Call will only work if
Instruction 97 is used in the *.DLD file. The
screen will refresh itself and update any
changes made to the strings.
HELP 0003:
Enter in the number to specify the 'labell'.
HELP 0004:
Enter in the string to specify the set state of the
'labell'. If the 'labell' is set, this string will be
spoken. The format of the string will be required
to end in a period. No input location will be
allowed in the string.
HELP 0005:
Enter in the string to specify the reset state of
the 'labell'. If the 'labell' is reset this string will
be spoken. The format of the string will be
required to end in a period. No input location
will be allowed in the string.
HELP 0006:
The initial message will be spoken when the
user calls the VS1. To include this message in
the initial messages, press the space bar. An X
in the box signifies that this string will be spoken
as an initial message.
HELP 0007:
Enter in the flag number or numbers of flags to
initiate call. Initiate Call occurs when the flag
specified in Instruction 97 is toggled. This string
will be included in the Initiate Call message
delivered to the user.
HELP 0008:
Enter in the input location string to specify the
string to be spoken. The string must be entered
in the following format: The string must have a
key word or phrase (for example: "temp") and
an input memory location $n, where n is an
input memory location from the CR10.
Example: THE "TEMPERATURE" IS $3
DEGREES CELSIUS.
In the example, "TEMPERATURE" is the key
word and $3 is the input memory location.
HELP 0009:
The help button invokes HELP screens for each
of the fields in the window.
HELP 0010:
The VS1 has a pre-determined list of valid
words that can be used to create the voice
strings. To invoke this list press <F2>, or click
on the "List" bar with the mouse. The user can
insert a word at the cursor position from the
word list window by using a mouse or <TAB> to