Campbell Scientific VS1 Telephone Modem with Voice Synthesizer - Manual (Page 36)

APPENDIX G. HELP, INFORMATION AND ERROR MESSAGES
G-3
This file contains the word list and must be
located in the path. The program will now exit.
ERROR 0004:
There must only be one input location per line.
Please re-enter the input string.
Example: THE "TEMPERATURE" IS $4.
ERROR 0005:
'no_word' are not in the word list. Please check
the word list for valid words.
ERROR 0006:
'no_word' is not in the word list. Please check
the word list for valid words.
ERROR 0007:
Please specify the 'labell' number.
ERROR 0008:
Please end the Set string with a period.
ERROR 0009:
Please end the Reset string with a period.
ERROR 0010:
Enter in the input location string to specify the
string to be spoken. The string must be entered
in the following format: The string must have a
key word or phrase (for example "temp") and an
input memory location $n, where n is an input
location from the CR10.
Example: THE "TEMPERATURE" IS $3
DEGREES CELSIUS.
In the example, "TEMPERATURE" is the key
word and $3 is the input memory location.
ERROR 0011:
A voice file (.vs1) does not exist for file 'name'
Would you like to create a voice file with the file
'name' ?
ERROR 0012:
Initiate Call is not set by Instruction 97 in the
*.DLD file.
ERROR 0013:
File 'name' already exists. Overwrite?
ERROR 0014:
Extension longer than three characters.
ERROR 0015:
Illegal drive specifier.
ERROR 0016:
Illegal characters in path.
ERROR 0017:
Invalid path.
ERROR 0018:
No file specified.
ERROR 0019:
Illegal characters in name.
ERROR 0020:
Name longer than eight characters.
NOTE: Words that are inside ' ' are code
variables.
Example: 'labell', labell specifies either a
PORT or a FLAG.