Campbell Scientific Wireless Sensor Network (CWB100, CWS220, and CWS900) - Manual (Page 23)

Wireless Sensor Network
FIGURE 3.1-1. A205 CWS to PC Interface
FIGURE 3.1-2. Connection of A205
3.1.2 Required Cables
A data cable, CSI part number 17648, ships with the A205. The cable has a
USB type A male connector on one end and a type B male connector on the
other end. The type B connector is connected directly to the CWB100 without
the A205 during configuration and is connected to the A205 when configuring
wireless sensors.
A serial cable is used for communication between the computer and the
datalogger.
15