Windows 95 users 225, System requirements 225, Windows 95 users – Apple LaserWriter 12/640 PS User Manual
Page 250
This chapter provides information on setting up and using the LaserWriter
12/640 PS with computers running Windows 95. It provides detailed
procedures for installing the software, using the printer’s parallel port, and
connecting the printer to a Novell NetWare network.
If you are using Windows 3.1 or DOS, see Chapter 7.
System requirements
To use the printer, your computer system must meet these requirements:
m
IBM PC or compatible, with an 80486 or higher CPU
m
hard disk drive
m
at least 8 megabytes (MB) of random-access memory (RAM)
m
Microsoft Windows 95
m
CD-ROM drive or a 3.5 inch floppy disk drive that reads 1.44 MB disks
m
If you’re using the printer on a network, you must set up your network
client software. You may use Client Software for NetWare Network from
Microsoft as your network client software.
225
8
Windows 95 Users