9 installing the termination board -16, 8 installing the termination board -16, 9 installing the termination board – Acer Altos 1100 Series User Manual
Page 30
Advertising
Altos 1100 Series User’s Guide
1-16
1.9
Installing the Termination Board
When you use only one CPU, you must have a termination board installed in the
empty slot.
Follow these steps to install the termination board:
1. Position the termination board over the empty slot.
2. Carefully insert the golden fingers of the termination board into the slot until
the board fits completely.
Figure 1-8 Installing the Termination Board
The termination board is pre-installed at the
factory for uniprocessor configurations.
Advertising