Acer Altos 1100 Series - Manual (Page 41)

Chapter 1 – System Board 1-27
Table 1-4 System Error Messages (continued)
Message Action
Memory Error at:
MMMM:SSSS:OOO
(W:XXXX, R:YYYY)
where:
M: MB, S: Segment,
O: Offset,
X/Y: write/read pattern
Check DIMMs on the system
board. Contact your dealer.
Memory Size Mismatch
CPU Clock Mismatch
Check the memory size based on
the system specifications. Check
the internal cable connections. If
you are sure that connections
and values are correct, ignore the
message. If the message
reappears, ask for technical
assistance.
Onboard Serial Port 1 Conflict Run Setup (See Section 2.1) and
disable the port.
Onboard Serial Port 2 Conflict Run Setup (See Section 2.1) and
disable the port.
Onboard Parallel Port Conflict Run Setup (See Section 2.1) and
disable the port.
Pointing Device Error Check and connect pointing
device.
Pointing Device Interface
Error Replace the pointing device or
contact your dealer.
Press F1 key to continue or
Ctrl-Alt-Esc for Setup Press or
+ + to enter
Setup.
Real Time Clock Error Run Setup (See Section 2.1) and
set the time and date.
Press Esc to turn off NMI, any
key to reboot Press to disregard the NMI
error.
Press any other key to reboot the
system.