NewAir Portable Dishwasher ADW-2600W - Manual (Page 15)

Cleaning the Spray Arms
You can easily remove the spray arms to for
periodically cleaning the nozzles. This will prevent
possible clogging. To remove a spray arm, simply
grasp in the middle and pull upwards. Wash nozzles
by placing under a stream of running water. Carefully
replace them, making sure that they can rotate freely.
Keep Your Dishwasher Running Smoothly
•
After Every Wash
After every wash, turn off the water supply and leave the door slightly open to ensure
that any lingering moisture and odor can properly escape.
•
Remove Electrical Plug
Before any type of cleaning or maintenance, always unplug your dishwasher from the
electrical outlet.
•
No Solvents or Abrasive Cleaning Products
Never use solvents or abrasive cleaning products when cleaning the exterior or rubber
parts of your dishwasher.
Always use a soft cloth and warm, soapy water
To clean spots or stains on the interior surface, use a soft cloth with vinegar or a product
specifically designed for interior use on dishwashers.
•
Vacation
If you plan on leaving for an extended period of time, run one wash cycle with the
dishwasher completely empty. Then unplug your dishwasher from the electrical outlet,
turn off the water supply and leave the door slightly open. The door seals will last longer
and you will eliminate the potential for any odors to accumulate.
•
Cleaning the Seals
If food becomes trapped within the seals, odors can quickly form. To prevent this, clean
all seals periodically with a damp cloth.
7. INSTALLATION INSTRUCTIONS
Attention: The installation of the pipes and electrical equipment should always be done
by a professional.
WARNING: Electrical Shock Hazard
Disconnect all electrical power before you install your dishwasher.
Failure to do so can result in electrical shock, injury or death.
Preparing for Installation
For ideal use, install your dishwasher near an existing inlet, drain hose and power code.
Choose one side of your dishwasher to use for connecting drain hoses.
13