AT&T E5600 - Manual (Page 11)

9
Appendix
Wall mounting
The base can be installed on any standard wall-phone outlet as shown below. Choose
a location away from electronic equipment, such as personal computers, television sets
or microwave ovens. Avoid excessive heat, cold, dust or moisture.
Plug power cord
transformer into
electrical outlet.
Connect cords as shown on page 7, then press and slide down
firmly so base is held securely on outlet mounting pegs.
Plug telephone line
cord into telephone jack.
Clip wall-mount bracket
securely into notches on
underside of base.
Install the line cord as
shown in the diagram.
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 9