AT&T E5600 - Manual (Page 17)

15
Telephone Operation
Handset settings
At the feature menu you can change settings to
customize how the telephone works.
Press
MENU
, then use the ^V buttons to scroll to
the feature you want to change. As you scroll through
the menu, the top menu item is always highlighted with
a > symbol. Press
SELECT
to select the highlighted item.
Press
OFF
at any time to cancel an operation, back up
to the previous menu, or exit the menu display.
Ringer volume
At this menu you can set a default ring volume level
(1-6), or turn the ringer off. Use the
^V buttons to
hear an example of each volume level, then press
SELECT
to select the one you prefer.
Ringer volume can also be adjusted by pressing
VOLUME
on the side of the handset during incoming
ringing.
Ringer tone
This feature allows you to choose one of 10 ringing
tones for outside calls or intercom calls. Use the
^V
buttons to hear an example of each ringer tone, then
press
SELECT
to select the one you prefer.
Key tone
The handset is factory programmed to beep at each key
press. Use the
^V buttons to select
ON
or
OFF
,
then press
SELECT
to save your preference.
Highlighted
menu item
> PHONE BOOK
CALL LOG
RINGER VOLUME
OUTSIDE TONE
1
KEY TONE
ON
INTERCOM TONE
1
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 15