AT&T Generic 3 - Manual (Page 2)

4
5
6
7
Dial outside number, extension, or feature access
code you want to store (up to 24 digits).
NOTE: You may be able to use the softkeys to add
special functions such as Pause, Mark, Wait, or
Suppress into the telephone numbers programmed
on the AD button.
Press [
#
].
Repeat Steps 3 through 5 to program additional
buttons.
Hang up.
To place an AD call
1 Pick up handset or press [
Speaker
].
2 Press selected AD button.
To program or reprogram an outside number,
extension, or feature access code into a
personal list
1
2
3
4
5
6
7
8
Pick up handset.
NOTE: For speakerphone users, press a call
appearance button or press [
Speaker
].
Press softkey below Prog (if shown on the display)
or Press [
Program
]
or Dial AD Program access code .
Dial Personal List number (1, 2, or 3).
Dial list item (1, 2, 3...).
Dial number you want to store (up to 24 digits).
NOTE: You may also be able to use the softkeys
to add special functions such as Pause, Mark,
Wait, or Suppress into the programmed telephone
numbers.
Press [
#
].
Repeat Steps 4 through 6 to program additional
items on the same list.
Hang up.
To place a call using an AD list button or
access code
1 Press [
Pers List
] or [
Grp List
] or [
Sys List
]
or Dial appropriate AD List access code:
●
List 1
2