Priority calling, Reset speakerphone, Select ring (and ringer volume) – AT&T Generic 3 User Manual
Page 7
To cancel a Leave Word Calling message
1
Press softkey below CnLWC (if shown on the
display)
or Press [
Cancel LWC
]
or Dial Leave Word Calling cancel code
.
2
Dial extension.
PRIORITY CALLING
To place a priority call (3-burst ring)
1
Press the softkey below PCall
(if shown on the display)
or Press [
Priority
]
or Dial Priority Calling access code
.
2
Dial extension and wait for party to answer.
RESET SPEAKERPHONE
To adjust the speakerphone to the surrounding
room acoustics
1
While on-hook, press [
Shift
] and then press
[
Speaker
].
●
You hear a series of tones.
SELECT RING (and RINGER VOLUME)
To select a personalized ring
1
Press [
Shift
] and then press [
Hold
].
●
Current ring pattern plays, and pattern number
is displayed.
2
To cycle through all eight ring patterns,
continue to press (and then release) [
Hold
]
(or press [
Next
→
→
] or [
←
←
Prev
] ).
3
When you hear the desired ring pattern,
press [
Shift
] again.
7