AT&T Generic 3 - Manual (Page 3)

●
List 2
2
●
List 3
Note: An [
Enhcd List
] may also be available.
Dial desired list item (1, 2, 3...).
AUTOMATIC CALLBACK
To automatically place another call to an extension
that was busy, or did not answer
1 During call attempt, press softkey below AutCB
(if shown on the display)
or Press [
AutoCallBk
].
2 Hang up.
●
You hear a 3-burst priority ring when both you
and the called extension are idle.
3 Pick up handset to be connected to call.
To cancel Automatic Callback
1 While on-hook, press softkey below AutCB again
or Press [
AutoCallBk
] again.
BRIDGING/MANUAL EXCLUSION
To answer a bridged call
1 Press [
xxxxx
] of bridged call and lift handset
or press [
Speaker
].
NOTE: If your terminal has Ringing Appearance
Preference, just lift the handset or press [
Speaker
].
To prevent other bridged terminals from entering a
call (on a per call basis)
1 Press the softkey below Excl while active on a call
or Press [
Excl xxxxx
] while connected to the call.
NOTE: Pressing the softkey below Excl or
pressing [
Excl xxxxx
] again reactivates bridging.
CALL COVERAGE/CONSULT
To answer a call for a coworker for whom you are
a coverage point
1 Press [
xxxxx
] of incoming call when ring begins or
green light flashes.
3