AT&T CL81211 - Manual (Page 21)

Handset settings
NOTE: If in the future, your telephone service provider requires you to dial 10 digits to make
a local call (area code plus telephone number), you need to delete your home
area code and dial out locally from the caller ID log. With the home area code displayed,
press and hold
MUTE
/DELETE until the digits are deleted, and then press
MENU
/SELECT.
The home area code is now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press
MENU/
SELECT
in idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >Settings, then press
MENU
/SELECT.
3. Use q
CID
or p
DIR
to scroll to >Dial mode, then press
MENU
/SELECT.
4. Use q
CID
or p
DIR
to highlight >Tone or >Pulse, then press
MENU
/SELECT. There is a confirmation tone and the screen
returns to the previous menu.
Website
Use this feature to view the AT&T website address.
1. Press MENU/
SELECT
in idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >Website, then press
MENU
/SELECT.
www.telephones.
att.com
> Website
Settings
p
q
DIAL MODE
>Tone
p
q
Home area code
>Dial mode
p
q
16
Telephone settings