Samsung LSA800SN-XAA - Manual (Page 14)

12
Table 1. Menu Adjustments
Icon
Settings and
Sub-menus
Description
Image Lock:
• Fine
• Coarse The Fine and Coarse adjustments allow you to more
closely adjust your FPD to your preference.
Use the “–” (
) and “+” ( ) buttons to adjust away
the interference. If satisfactory results are not
obtained using the Fine adjustment, use the Coarse
adjustment and then use Fine again. This function may
change the width and centering of the display image.
Use the Horizontal function on the Position menu to
center the display image on the screen.
• Auto
Adjustment
Select this icon to adjust for and limit the amount of
noise visible in the displayed image which can appear
as horizontal lines or areas on the screen where the
image is unstable and jitters or shimmers.
Auto Adjustment allows the FPD to self-adjust to the
incoming video signal. After using Auto Adjustment
you can further tune your FPD to your liking using the
Fine and Coarse adjustments.
Caution: Using Auto Adjustment will cause any
stored user settings to be overwritten.
Position :
• Horizontal
• Vertical Select this icon to move the viewing area on the FPD
screen. Use the “–” (
) and “+” ( ) buttons to move
the viewing area to the left or right when Horizontal is
selected and up and down when Vertical is selected.
Color Control:
• R(ed)
• G(reen)
• B(lue) Select this icon to adjust the color hue and saturation.
The color hue is most noticeable in areas of white.
Use the “–” (
) button to decrease the amount of the
selected color. Use the “+” ( ) button to increase the
amount of the selected color.
Adjusting Your FPD
sa800e2.fm Page 12 Monday, May 29, 2000 2:09 PM