Samsung LSA800SN-XAA - Manual (Page 17)

15
Français
Español
Deutsch
Italiano
English
Portuguese
PowerSaver
This FPD has a built-in power management system called PowerSaver. This system saves
energy by switching your FPD into a low-power mode when it has not been used for a certain
amount of time. The available modes are “On”, “Standby”, “Sleep Mode”, and “Deep Sleep
Mode”
Table 2. Power-saving modes
NOTE: This FPD automatically returns to normal operation when horizontal and vertical sync
return. This occurs when you move the computer’s mouse or press a key on the key-
board.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
NOTE: Screen saver video patterns designed for use with CRT-based monitors are not recom-
mended for use with your FPD since they may not extinguish the FPD’s back light
resulting in premature aging.
State
Normal
Operation
Power-Saving Function mode (EPA/NUTEK)
Standby Mode
Sleep Mode
Position A1
Deep Sleep Mode
Position A2
Horizontal Sync
Vertical Sync
Video Active
Active
Active Inactive
Active
Blanked Active
Inactive
Blanked Inactive
Inactive
Blanked
Power
Indicator Green Amber Green/Amber
Blinking
(0.5 sec
interval) Amber
Blinking
(1 sec interval)
Power
Consumption 60W (Max.)
56W (Nom.)
Less than 5W Less than 5W Less than 5W
Adjusting Your FPD
sa800e2.fm Page 15 Monday, May 29, 2000 2:09 PM