Samsung LSA800SN-XAA - Manual (Page 15)

13
Français
Español
Deutsch
Italiano
English
Portuguese
Reset:
• Geometry
• Color Select this icon to return to the factory preset values
for the selected group of functions. Resetting the
Geometry settings changes the Position settings,
Image Lock settings and changes the Image Size to
Expand 2.
Resetting the Color settings changes the colors back
to their original factory settings.
Language:
• English
• Deutsch
• Español
• Français
• Italiano
• Svenska Select one of the six languages to use for the OSM.
The language chosen affects only the language of the
OSM, but does not alter its function. Neither does it
have any effect on any software running on the com-
puter.
Menu Display
Time:
• 5 Seconds
• 10 Seconds
• 20 Seconds
• 200 Seconds The OSM stays active for as long as it is in use. The
Menu Display Time sets the length of time the OSM
will remain active after the last time you pushed a
button. The default time is 10 seconds.
Menu Position:
• Vertical
• Horizontal Select this icon to change the position of the OSM on
the screen. The “–” (
) and “+” ( ) buttons move
the OSM. Select the Horizontal function to move the
OSM to the left or right; select the Vertical function to
move the OSM up or down.
Image Size:
• Normal
• Expanded 1
• Expanded 2 If your computer or video board supplies a signal rate
and addressability lower than 1280 x 1024, this FPD
provides a scaling processor that can expand the
addressability up to 1280 x 1024. Select the Normal
setting to use the normal size viewing area for the cur-
rent signal. Select Expanded 1 to expand the viewing
area to the full width of the FPD screen. Select
Expanded 2 to extend the viewing area both horizon-
tally and vertically to the full size of the FPD screen.
Table 1. Menu Adjustments ( Continued )
Icon
Settings and
Sub-menus
Description
Adjusting Your FPD
sa800e2.fm Page 13 Monday, May 29, 2000 2:09 PM