Connecting an s-vhs vcr – Samsung TXP2028X-XAC User Manual

Page 16

Advertising
background image

16

I

N S TA L L AT I O N

3

Connect an S-video cable
between the S-VIDEO OUT
jack on the VCR and the
S-VIDEO IN jack on the TV.

An S-video cable is usually included with an S-VHS VCR. (If not, check your local
electronics store.)

2

Connect a set of audio
cables between the AUDIO
OUT jacks on the VCR and
the AUDIO INPUT2 jacks on
the TV.

1

To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.

Connecting an S-VHS VCR (TX-P2034/TX-P2036)

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.

(This connection delivers a better picture as compared to a standard VHS VCR.)

VCR Rear Panel

TV Rear Panel

Coaxial Cable

VCR Rear Panel

TV Rear Panel

Audio Cable

VCR Rear Panel

TV Rear Panel

S-Video Cable

AA03382A-00_SEA/SECA_ENG 3/10/04 2:29 PM Page 16

Advertising
This manual is related to the following products: