Samsung TXP2028X-XAC - Manual (Page 17)

17
I
N S TA L L AT I O N
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Note: Only 480i formats are supported.
Note: For an explanation of Component video, see your DVD player's owner's manual.
1
Connect a set of audio
cables between the AUDIO
INPUT 2 jacks on the TV
and the AUDIO OUT jacks
on the DVD player.
2
Connect a video cable
between the COMPONENT
INPUT (Y, Pb, Pr) jacks on
the TV and the DVD-OUT
(Y, Pb, Pr) jacks on the DVD
player.
Connecting a Second VCR to Record from the TV
(TX-P2030/TX-P2034/TX-P2036)
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
1
Connect a set of audio
cables between the AUDIO
OUT jacks on the TV and
the AUDIO IN jacks on the
VCR.
2
Connect a video cable
between the VIDEO OUT
jack on the TV and the
VIDEO IN jack on the VCR.
Refer to your VCR’s instructions for more information about how to record using this kind
of connection.
(The VCR input jacks might be either on the front or on back of the VCR.)
VCR Input Panel TV Rear Panel
Audio Cable
VCR Input Panel TV Rear Panel
Video Cable
DVD Player Rear Panel
TV Rear Panel
Video Cable
DVD Player Rear Panel TV Rear Panel
Audio Cable
AA03382A-00_SEA/SECA_ENG 3/10/04 2:29 PM Page 17