Samsung TXP2028X-XAC - Manual (Page 23)

23
O
P E R AT I O N
3
Press the œ œ or √ √ button.
The TV will begin
memorizing all of the avail-
able channels.
Storing Channels in Memory (Automatic Method)
▼
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press the MENU button at any time
to interrupt the memorization
process and return to the Channel
menu.
2
Press the ▲ or ▼ button
to select “Auto program”.
1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~2 on
previous page.
Press the MENU button,
then press the
▲ or ▼
button to select “Channel”
then press the œ
œ or √ √ button.
4
After all the available channels are stored, the Channel menu
reappears. Press the EXIT button to exit.
Auto Program
ANT 30
Exit
ANT/CATV œ œ ANT √ √
Auto Program √ √
TV/AV œ œ TV √ √
Fine Tune √ √
Add/Erase √ √
Channel
Move Select Exit
ANT/CATV œ œ ANT √ √
Auto Program √ √
TV/AV œ œ TV √ √
Fine Tune √ √
Add/Erase √ √
Channel
Move Select Exit
AA03382A-00_SEA/SECA_ENG 3/10/04 2:29 PM Page 23