Samsung SGH-I257ZKAATT - Manual (Page 113)

Connections 106
– Auto connect: Automatically connected to an AT&T
Wi-Fi Hotspot as soon as your phone detects it.
– Install certificates: Install authentication certificates.
– MAC address: View your device’s MAC address,
required when connecting to some secured networks
(not configurable).
– IP address: View your device’s IP address.
• WPS push button: Set up a connection to a WPS
(Wi-Fi Protected Setup) router or other equipment.
• WPS PIN entry: View the PIN used by your device to
set up a PIN-secured connection to a Wi-Fi router or
other equipment (not configurable).
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Note: See your service plan for applicable charges for
Wi-Fi Direct.
1. From a Home screen, touch Apps ➔
Settings ➔ Connections ➔ Wi-Fi.
2. Touch the ON/OFF button to turn Wi-Fi on.
3. At the bottom of the Wi-Fi screen, touch Wi-Fi Direct.
4. Enable Wi-Fi Direct on the other device. Consult the
other device’s documentation for more information.
5. On your phone, touch Scan.
The device scans for other Wi-Fi Direct devices.
6. Once the device you want to connect to displays,
touch it.
7. The other device has 1 minute to touch Connect for
the connection to be made.
Connections