Samsung SC-D5000-XAC - Manual (Page 108)

ENGLISH
108 108
The Camera : Basic Picture Taking
1. Turn your camera on by setting the Power Switch to (CAMERA) mode.
2. Turn the Mode Dial to (PLAY) mode.
A stored picture or movie is displayed.
3. Press the LEFT or RIGHT button to locate the motion clip to be played back.
The MPEG indicator is displayed when a motion clip is selected.
4. Press the PLAY button to start playback.
Playback begins.
5. To pause playback, press the (PLAY/STILL) button. To resume playback, press the (PLAY/STILL) button again.
To stop playback, press the (STOP) button.
6. During the playback, use the (FF) button or (REW) button to move faster to the desired position in the motion clip.
✤ When you playback a motion clip (MPEG) on the LCD monitor or on a TV connected, the sound is not played back.
Recorded sound is played back on a PC after copying or moving the motion clip to a PC.
✤ In (PLAY) mode, the LCD monitor may flash when you switch from STOP to PLAY.
✤ To playback recorded motion clips on a PC, install the Quick Time Player from the provided DVC Media 5.1 Software CD.
1. Turn your camera on by setting the Power Switch to (CAMERA) mode.
2. Turn the Mode Dial to set the (PLAY) mode.
A stored picture or movie is displayed.
3. Press the LEFT or RIGHT button to locate the motion clip to be deleted.
4. Press the
(DELETE) button to delete selected pictures.
The message “DELETE?” and the available options are displayed.
5. To delete the motion clip, press the OK button or press the LEFT button to cancel.
If deleted, the previous picture or motion clip stored is displayed. If Delete is cancelled, it returns to the previous screen.
To Playback a Recorded Motion Clip
To Delete a Recorded Motion Clip
Viewing a Motion Clip (MPEG)
Reference
00:00:05
STOP
10/15
00779F VPD6050-UK (060-123) 8/16/04 1:42 PM Page 108