Samsung SC-D5000-XAC - Manual (Page 47)

ENGLISH
47 47
The Camcorder : Basic Recording
Inserting and Ejecting a Cassette
✤ Do not apply excessive force when inserting a cassette or closing the cassette holder, as it may
damage the moving parts.
✤ Do not use any tapes other than MiniDV cassettes.
1. Turn on your Camcorder, then slide the TAPE EJECT button on the bottom of the camcorder and
open the cassette door until it clicks.
The cassette holder automatically rises and opens forward.
2. Insert a tape into the cassette holder with the tape window facing outward and the protection tab
toward the top.
3. Press the [PUSH] label on the cassette holder and wait until it clicks and goes back into place. Do
not apply excessive force or pressure on the cassette holder. Do not forcibly push the cassette
holder into the camcorder.
The cassette is automatically loaded.
4. Close the cassette door.
1. Slide the TAPE EJECT button to open the Cassette holder and open the cassette door until it
clicks.
2. Remove the cassette tape, which is automatically ejected by pulling the cassette out.
3. Press the [PUSH] label on the cassette holder and wait until it clicks and goes back into place.
4. Close the cassette door.
✤ Cautions on Tape Storage: Avoid places with magnets or magnetic fields. Avoid humidity and dust
prone places. Keep the tape in an upright position and avoid storing it in direct sunlight.
Inserting a Cassette
Ejecting a Cassette
Reference
00779F VPD6050-UK (008-059) 8/16/04 1:41 PM Page 47