Samsung SC-D5000-XAC - Manual (Page 146)

ENGLISH
146 146
Miscellaneous Information
✤ If there are no input terminals for external devices on your TV set and a VCR is connected to your TV set using a coaxial
cable, you can utilize the VCR to connect your camcorder to the TV set.
To Connect to a VCR that is Connected to Your TV Set
1. Connect the Multi-AV cable to your camcorder’s multi-AV jack.
2. Connect the Multi-AV cable to the External Inputs (LINE-IN) on the VCR by
matching the colours of the terminals.
3. Connect the TV and VCR using the coaxial cable. Refer to the Video or
TV’s instruction book for further connection details.
4. Set the input source of the VCR to the external input source connected to
your camcorder.
To Play Back Recorded Video
1. Turn your TV on and select the external input source that is connected to the VCR. Set the TV channel to view the VCR. 3 or
4 is most often used.
2. Locate the desired position on the tape using the (REW) or (FF) button.
3. Press the (PLAY/STILL) button of the camcorder to start playback.
4. To stop the playback, press the (STOP) button.
✤ If the VCR has an S-VIDEO input terminal, you may use S-VIDEO for better quality.
✤ The S-VIDEO terminal transmits video only. Connect AUDIO cables for sound.
✤ If only a mono audio input is available on the TV set, use the audio cable with the white plug.
Connecting to a TV Set Through a VCR
Reference
ANTENNA
S-VIDEO
input
MULTI-AV
TV
VCR CAMCORDER
Video input (Y)
Audio input (L)
Audio input (R)
00779F VPD6050-UK (124-168) 8/16/04 1:43 PM Page 146