Samsung DVD-V2500-XAA - Manual (Page 10)

Tuner Band Setting
19
This feature allows you to manually set the DVD-VCR’s tuner band
to Antenna or Cable, whichever you connected to the Antenna In
jack during initial setup.
• Use this setting only if Auto Setup detected the incorrect tuner
band, i.e. channels are coming in on the wrong channel numbers.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “VCR Setup”
Using the up and down buttons, move the selection cursor to
“VCR Setup,” then press ENTER to select.
3 Select “Channel”
Using the up and down buttons, move the selection cursor to
“Channel”, then press ENTER to select.
4 Select “Ant/Cable”
Move the selection arrow to “Ant/Cable” then press right to select
from the following options:
• Antenna - Indicates that the DVD-VCR is connected to an indoor
or outdoor VHF/UHF antenna.
• Cable TV - Indicates that the DVD-VCR is connected to Cable TV.
1
Clock
Channel
Tape Length T120
Auto play On
Auto Repeat Off
Language
DVD Setup
VCR Setup
Option
Program
Parental
Return
Enter
DVD DVD
CHANNEL SETUP
❿ Ant/Cable: [Cable TV]
Auto channel memory
Channel add/delete
RETURN ❷ ➛ ❿
CHANNEL SETUP
❿ Ant/Cable: [Antenna]
Auto channel memory
Channel add/delete
RETURN ❷ ➛ ❿
Manual Clock Set
18
If Auto Setup was unable to find a local TV station to set the DVD-
VCR’s internal clock, follow these instructions to set the date/time
manually.
NOTE: It is important to set the clock for accurate Timer
Recording.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “VCR Setup”
Using the up and down buttons, move the selection cursor to
“VCR Setup,” then press ENTER to select.
3 Select “Clock”
Using the up and down buttons, move the selection cursor to
“Clock Set/Adjust,” then press ENTER to select.
4 Select “MANUAL”
Move the selection arrow to “MANUAL”, then press ENTER to turn
this feature “On.”
• The “Set Clock Menu” will change as shown.
5 Set the Clock
Press LEFT/RIGHT to select each of the following options, then
press UP/DOWN to set each option:
• Set Hour – Set the hour using the up and down buttons.
• Set Minute – Set the minute using the up and down buttons.
• Set Month – Set the month using the up and down buttons.
• Set Day
– Set the day using the up and down buttons.
• Set Year – Set the year using the up and down buttons.
6 Confirm Settings
Press the RETURN button to save your clock settings and return to
the Setup menu.
• Press Return again to exit.
1,3
Clock
Channel
Tape Length T120
Auto play On
Auto Repeat Off
Language
DVD Setup
VCR Setup
Option
Program
Parental
Return
Enter
DVD DVD
CLOCK SET/ADJUST
TIME DATE YEAR
12:00 A M 1/01 2002 TUE
RETURN ❷ ➛ ❿
CLOCK SET/ADJUST
Auto
❿ Manual
RETURN ❷ ENTER
01A DVD-V2500/XAC-Eng2 6/19/02 9:03 AM Page 18