Samsung DVD-V2500-XAA - Manual (Page 14)

Digital Output
27
If your A/V receiver is equipped with a Dolby Digital decoder, your
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST
enable this feature in the menu system to prevent damage to your
speakers.
NOTE: Select “Bitstream” ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD-VCR back panel.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “DVD Setup”
Using the up and down buttons, move the selection cursor to “DVD
Setup,” then press ENTER to select.
3 Set “Digital Output”
Move the selection bar to “Digital Output” then press the right/left
button to select from the following options:
• PCM - To use your DVD/TV with an A/V receiver NOT equipped
with a Dolby Digital decoder.
• Bitstream – To use your DVD/TV with an A/V receiver equipped
with a Dolby Digital decoder.
Parental
26
Rating Control is a password protected system that allows you to
block playback of DVDs based on their content. The system uses an
eight level rating system.
• If you try to play a DVD that exceeds the selected rating, an error
message will appear.
• Not all discs are rated.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “Parental”
Using the up and down buttons, move the selection cursor to
“Parental,” then press ENTER to select.
3 Select “Use Password”
Move the selection arrow to “Use Password,” then press the
right/left button to select from the following options:
• Off - Indicates that no password is required to view any DVD
disc or to change Rating Control options. No additional Rating
Control settings are necessary.
• On – Indicates that a password is required to view some DVD
discs and to view Rating Control options. The menu will change
as shown.
NOTES:
• The first time “Enter Password” is set to “On,” you will be
prompted to enter a new password.
• If the “Enter Password” screen appears, then “Re-enter
Password” has already been set to “Yes.” Please skip to Step 5.
4 Enter Password
Enter a 4-digit password using the 0–9 buttons on the remote
control.
• Write your password down, and keep it in a safe place in case
you need it to change your settings later.
5 Select “Rating Level”
Move the selection bar to “Rating Level,” then press ENTER to
select.
6 Change Rating Level
Use the up/down to select one of the following ratings:
• Level 8 Adult • Level 4
• Level 7 • Level 3
• Level 6 • Level 2
• Level 5 • Level 1 Kids Safe
All ratings above the level you select will also be blocked, e.g., if
you block Level 6, then Levels 7 and 8 will also be blocked.
Press ENTER to confirm your selection.
• If you forgot your password, press power on from a cold start
with no disc in the unit. Press the REW and F.F buttons
simultaneously on the front panel for 5 seconds.
Use Password
Language
DVD Setup
VCR Setup
Option
Program
Parental
Return
Enter
DVD DVD
Parental
Enter Password
? - - -
Create
Password
Language
DVD Setup
VCR Setup
Option
Program
Parental
Return
Enter
DVD DVD Use Password Off
Use Password
1 Rating Level
Change Password
Language
DVD Setup
VCR Setup
Option
Program
Parental
Return
Enter
DVD DVD
Language
DVD Setup
VCR Setup
Option
Program
Parental
Return
Enter
DVD DVD
Parental Rating Level
Kids Safe
1
Rating Level
Use Password
Rating Level
Change Password
Language
DVD Setup
VCR Setup 1
On
Option
Program
Parental
Return
Enter
DVD DVD
Digital Output PCM
DTS
Dynamic Compression
2x Scan Audio
TV Aspect
Off
On
Off
Wide
Language
DVD Setup
VCR Setup
Option
Program
Parental
Return
Enter
DVD DVD
PCM
Bitstream
1
8
~
01A DVD-V2500/XAC-Eng2 6/19/02 9:03 AM Page 26