Samsung DVD-V2500-XAA - Manual (Page 18)

Title/Chapter/Time Selection
35
If you press the DISPLAY button during DVD playback, you can
view the current Title, Chapter/Track, and counter position. You
can also use the Display screen as a fast way to choose a title,
chapter/track, or playing time.
1 View the Display
Press the DISPLAY button on the remote control during DVD/CD
playback.
2 Select Title
Press the up/down and left/right buttons to select Title, then press
ENTER to change among all available titles on the disc.
• The “TITLE” icon light will turn on the Front Panel Display.
3 Select Chapter or Track
Press the up/down and left/right buttons to select Chapter or Track,
then press ENTER to change among all available Chapters/Tracks
on the disc.
• The “CHAP” icon light will be on the Front Panel Display,
followed by the current title number, hours, minutes, and
seconds.
4 Select Counter Position
Press the up/down and left/right buttons to select the counter
position indicator, then use the number buttons (0-9) to enter the
desired counter position in the format HH:MM:SS (H = Hours, M =
Minutes, S = Seconds).
Then press ENTER to enter the desired counter position.
1
Title 02 / 02
01 / 01
00 : 01 : 58
ENG 5.1CH
Off
1 / 1
Off
Off
Time
Audio
Subtitle
Display
Angle
Repeat
3D
A
Return
Enter
Chapter
Title 02 / 02
01 / 01
00 : 01 : 58
ENG 5.1CH
Off
1 / 1
Off
Off
Chapter
Time
Audio
Subtitle
Display
Angle
Repeat
3D
A
Return
Enter
Title 02 / 02
01 / 01
00 : 01 : 58
ENG 5.1CH
Off
1 / 1
Off
Off
Chapter
Time
Audio
Subtitle
Display
Angle
Repeat
3D
A
Return
Enter
Disc Menu Navigation
34
Many DVDs feature their own menu systems, where you can select
Titles, Chapters, Audio Tracks, Subtitles, and special disc features,
such as movie trailers, and information on the cast. Use these
buttons to make selections in the Disc menus.
1 DISC MENU Button
Press to access the DVD’s Disc menu, if applicable.
2 Press , ❷ or ➛ , ❿ to navigate through DVD’s Disc menu
options.
• Press up, down, left and right to highlight menu choices.
3 ENTER Button
Press to make your selections in the Disc menu.
4 TITLE Button
Press to access the DVD’s Title menu, if applicable.
1 SCREEN FIT Button
During play, press SCREEN FIT button on the remote control.
• Allows you to eliminate the black bars in the top and bottom of
the screen when a movie is playing in the all DVD disc.
• Screen Fit will work when the Zoom mode is active.
(you can not remove the black bars on the screen) However,
Zoom mode will work when Screen Fit is active.
➢
• Various aspect ratios are available only in multiple
screen format discs.
• This function does not work when a DVD has been
recorded in a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated
due to their aspect ratio.
Screen Fit Playback
2
2
1
4
3
2
2
01A DVD-V2500/XAC-Eng3 6/19/02 9:05 AM Page 34