Samsung SC-D27-XAA - Manual (Page 55)

ENGLISH
51 51
Advanced Recording
● DATE/TIME
✤ The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes.
✤ The date and time are automatically recorded on a special data area of the tape.
1. Press the MENU button.
■ The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and press the ENTER button.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Press the ENTER button to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
■ You can choose to display - the OFF, DATE, TIME, DATE/TIME
-
OFF only
- DATE only
- TIME only
- DATE & TIME
■ To return to the previous menu, highlight the DATE/TIME in the middle of the and
press the ENTER button.
6. To exit, press the MENU button.
Notes
■ The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
■ The DATE/TIME will read “- - -” in the following conditions.
-
During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera’s memory.
- When the lithium battery becomes weak or dead.
■ Before you can use the DATE/TIME function, you must set the Clock.
See CLOCK SET on page 37.
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
INITIAL
LCD ADJUST
DATE / TIME
TV DISPLAY
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
DATE / TIME
VIEWER SET
DATE
TIME
DATE&TIME
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 51