Samsung SC-D27-XAA - Manual (Page 79)

ENGLISH
Recording in PLAYER mode
75 75
✤ You can use this camcorder as a recorder.
✤ You can record a tape from VCR or TV.
1. Connect the camcorder and VCR or TV with the Audio/Video cable.
2. Set the power switch of the camcorder to PLAYER mode.
3. Turn on the VCR or TV.
4. Insert the blank tape with protection tab closed into the camcorder.
■ If you want to record from the connected VCR,
insert a recorded VHS tape into the VCR.
5. Press the MENU button, turn the MENU DIAL to highlight A/V and press the
ENTER button.
6. Turn the MENU DIAL to highlight AV IN/OUT and press the ENTER button to select
AV IN.
7. Press the START/STOP button to set the camcorder to REC PAUSE mode.
■ “PAUSE” and picture appear on the LCD monitor.
8. Select the TV program or playback the VHS tape.
9. Press START/STOP button to start recording.
■ If you want to pause recording for a while, press the START/STOP button again.
10.To stop recording, press the (STOP) button.
Reference
■ When you record the images being played back on analog VCR, if they are not being played back in normal speed,
(for example, more than double speed or slow playback), only gray image appears on the camcorder.
■ If you want to see the camcorder images with a TV, set menu of “AV IN/OUT” to “OUT”.
Recording in PLAYER mode
M U LT I
ANTENNA
S-VIDEO
S-VIDEO
A/V TV
VCR
CAMCORDER
VIDEO
AUDIO(L)
AUDIO(R)
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 75