Samsung SC-D27-XAA - Manual (Page 67)

ENGLISH
Advanced Recording
63 63
1. Press the PHOTO button and hold it.
■ The still picture appears on the LCD monitor.
■ If you do not wish to record, release the button.
2. Release the PHOTO button and press the PHOTO button again in 2 seconds.
■ The still picture is recorded for about 6~7 seconds.
3. After the PHOTO has been recorded, the camcorder returns to STBY mode.
Searching for a PHOTO picture
✤ The PHOTO SEARCH works in PLAYER mode only.
1. ■ Press the MENU button. (or press the PHOTO SEARCH button on the remote control.)
■ The MENU list will appear.
2. Turn the MENU DIAL to highlight A/V.
3. Press the ENTER button to enter the sub-menu.
4. Select PHOTO SEARCH from the sub-menu and press the ENTER button.
5. Search the PHOTO using the (FF) and (REW) buttons.
■ The PHOTO search process appears on the LCD while you are searching.
■ After completing the search, the camcorder displays the still image.
6. To exit, press the (STOP) button.
PLAYER MODE
INITIAL
WIND CUT
PB DSE
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE
12
AUDIO SELECT
CAMERA
A/V
MEMORY
VIEWER
AV IN/OUT OUT
PLAYER MODE
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
12
SOUND[1] AUDIO SELECT
WIND CUT
A / V SET
PB DSE
AV IN/OUT
OUT
PHOTO Image Recording
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 63