Samsung SMX-F54BN-XAA - Manual (Page 113)

106 10 106 10
Displays
Symptom Explanation/Solution
Unknown indicator appears
on the screen.
A warning indicator or message appears on the screen. pages 103~105 •
An after image remains on
the LCD screen.
This occurs if you disconnect the AC power adaptor or remove the battery before turning the power off. •
The image on the LCD
screen looks dark.
Ambient light is too bright. Adjust the brightness and angle of the LCD.
Use the LCD Enhancer function.
•
•
Storage media
Symptom Explanation/Solution
Memory card functions are
not operable.
Insert a memory card into your camcorder properly. page 31
If you use a memory card formatted on a computer, format it again directly on your camcorder. page 80
•
•
Image cannot be deleted.
You cannot delete the images protected by another device. Release the protection of the image on the
device. page 70
Release the lock on the write-protect tab of the memory card (SDHC memory card, etc.), if any. page 32
•
•
You cannot format the
memory card.
Release the lock on the write-protect tab of the memory card (SDHC memory card, etc.), if any. page 32
Copy all important recorded files to your PC before formatting. Samsung shall not be responsible for any
loss of data. (You should copy the data to your PC or other storage media.)
•
•
The data file name is not
indicated correctly.
The file may be corrupted.
The file format is not supported by your camcorder.
Only the file name is displayed if the directory structure does not comply with the international standard.
•
•
•
Does not charge or operate
even if the battery is inserted.
Check whether you're using a Samsung battery. A non-Samsung battery may not be recognised
properly by the camcorder.
•
Troubleshooting