Samsung SMX-F54BN-XAA - Manual (Page 93)

6  6 
LCD ENHANCER
You can enhance the contrast on the LCD screen for a clearer and
brighter image. This effect also works outdoors in bright daylight.
You can also adjust the screen brightness in two-level increments,
which provides a brighter screen than using just a one-level
increment.
1. Press the MENU button  Control
(Left/Right) button  “Settings” 
Control (Up/Down/OK) button 
“LCD Enhancer”
2. Select the desired submenu item
with the Control (Up/Down) button,
and then press the OK button.
3. Press the MENU button to exit the menu.
LCD enhancer function does not affect the quality of the image being
recorded.
When you use the LCD Enhancer in low illumination, some stripes
may appear on the LCD screen. This is not a malfunction.
Using the LCD Enhancer function may cause colours to look different
on the display.
•
•
•
AUTO LCD OFF
To reduce power consumption, the brightness of the LCD screen
is automatically dimmed if the camcorder is idle for more than 2
minutes.
1. Press the MENU button  Control
(Left/Right) button  “Settings” 
Control (Up/Down/OK) button  “
Auto LCD Off.”
2. Select the desired submenu item
with the Control (Up/Down) button,
and then press the OK button.
3. Press the MENU button to exit the menu.
When the “Auto LCD Off” function is enabled, you can press any
button on the camcorder to return LCD brightness to normal.
Auto LCD Off will be disabled in the following case:
- If the DC power cable (AC power adaptor, USB cable) is connected.
•
•
Submenu Items
Items Use
On-screen
display
Off To disable the function. -
1 To turn on the 1st level of the LCD Enhancer.
1
2
To turn on the 2nd, brighter level of the LCD
Enhancer. 2
System setting
Submenu Items
Items Use
On-screen
display
Off To disable the function. -
On
When the camcorder is idle for more than
2 minutes in Video or Photo STBY mode, or for
more than 5 minutes when recording a video, the
power saving mode starts by dimming the LCD
screen.
-
Settings
Auto LCD Off
LCD Colour
LCD Enhancer
Exit
STBY 0:00:00 [475Min]
Select
SCENE
LCD OFF
:
OFF
: Settings
LCD Enhancer
LCD Brightness
LCD Colour
Exit
STBY 0:00:00 [475Min]
Select
SCENE
: 0
:
OFF