Samsung SCH-R420DAAMTR - Manual (Page 79)

Voice SVC 76
Sensitivity
1. In standby mode, press the MENU soft key, then select
Voice SVC ➔ Voice Settings ➔ Sensitivity.
2. Use the Up and Down navigation keys to adjust the
selected Sensitivity setting incrementally between Reject
More spoken commands or names and Reject Less spoken
commands or names.
3. Press OK or to accept the new setting. Press to
discard the new setting and return to the Voice Settings
menu.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing:
• Use Adapt Digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
• Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1. In standby mode, press the MENU soft key, then select
Voice SVC ➔ Voice Settings ➔ Digit Dialing ➔ Adapt Digits.
Your phone displays text describing the Adapt Digits
process.
2. Press the key. Your phone displays the first digit
sequence and “Please say” plays through the speaker
followed by the four digits appearing in the display.