Samsung HW-D650S-ZA - Manual (Page 39)

English
39
03
Setup
Setting the Test Tone
Use the test tone to check the speaker connection status or level.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the ▲▼ buttons to select SPEAKER, and then press
the ENTER button.
Press the ▲▼ buttons to select TEST TONE, and then press
the ENTER button.
Press the ▲▼ buttons to select the option you want, and then
press the ENTER button.
AUTO : Test signal will be automatically output as follows;
F.L
 CEN  S.W  F.R  S.R  S.L.
- During test tone output, press the ▲▼ buttons to adjust the
speaker output level from -10 to +10 dB by 1 step.
MANUAL : Enables you to adjust the output level of the
speaker manually.
1) Press the ENTER button to select the speaker
you want.
Each time you press the ENTER button, F.L
 CEN  S.W  F.R  S.R  S.L will be
selected in turn.
2) Press the ▲▼ buttons to set the Test Tone
mode you want.
You can adjust the speaker output level from -10
to +10dB by 1 step.
The sound gets quieter at -10dB and louder at
+10dB.
- Test Tone Output -
• F.L (front left) : -10 ~ +10dB • CEN (center) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB • S.W (subwoofer) : -10 ~ +10dB
• S L (surround left) : -10 ~ +10dB • SBL (surround back left) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB • SBR (surround back right) : -10 ~ +10dB
- To stop test tone -
Press the SETUP/MENU button once.
SETUP OFF appears on the display and test tone stops.
NOTE
In the Dolby Pro Logic IIx mode, test signal will be automatically output as follows :
F.L
 CEN  S.W  F.R  S.R  SBR  SBL  S.L.
In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows :
F.L
 FHL  CEN  S.W  FHR  F.R  S.R  S.L.
1.
•
2.
3.
4.
•
•
•
✎




> MOVE SELECT ' RETURN EXIT
▲ F L
0 d B
▼
SL
0dB
SR
0dB
FR
0dB C
0dB
SW
0dB
USER
MANUAL
HW-D600_D650S_XAA_0616.indd 39 HW-D600_D650S_XAA_0616.indd 39 2011-06-16 10:27:58 2011-06-16 10:27:58