Samsung HW-D650S-ZA - Manual (Page 41)

English
41
03
Setup
Setting NEO:6 Mode
You can play back 2 channel sound over 5.1 or 7.1 channels when enjoying music or a movie.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the ▲▼ buttons to select SURROUND, and then press
the ENTER button.
Press the ▲▼ buttons to select DTS NEO:6, and then press
the ENTER button.
Press the ENTER buttons to set the C-IMAGE mode you want.
Press the ◄ ► buttons to set the C-IMAGE from 0 to 5.
This parameter adjusts the center image through the front and
center speakers. "5" is the wider.
Using NEO:6 Mode
Press the NEO:6 button on the remote control.
MUSIC : When listening to music, you can experience sound
effects as if you are listening to the actual performance.
CINEMA : Adds realism to the movie soundtrack.
OFF : Output the original signal as it is without applying the sound fi eld effect or any other sound effect.
NOTE
NEO:6 works only for 2-ch audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
Setting EX/ES Mode
When surround back speakers are connected, you can listen to 7.1 multi-channel sound using the built-in
Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source
(such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches
between INPUT and SETUP OFF.
Press the ▲▼ buttons to select SURROUND, and then press
the ENTER button.
Press the ▲▼ buttons to select EX/ES, and then press the
ENTER button.
Press the ▲▼ buttons to set the EX/ES mode you want.
AUTO : If the unit receives an audio signal that it can
recognize, it will select an optimal decoder for playback in
7.1 channels.
If the amplifi er does not recognize the audio signal, it will not
play in 7.1 channel automatically.
OFF : Dolby Digital Surround EX / DTS ES decoder will not
be used for playback.
ON : Dolby Digital or DTS signal will be played in 7.1 channel using Dolby Digital Surround EX /
DTS ES decoder.
NOTE
You cannot use DTS-ES without surround back speakers connected.
1.
•
2.
3.
4.
•
•
•
✎

1.
•
2.
3.
4.
•
•
•
✎





HW-D600_D650S_XAA_0616.indd 41 HW-D600_D650S_XAA_0616.indd 41 2011-06-16 10:27:59 2011-06-16 10:27:59