Samsung LNR237WX-XAP - Manual (Page 15)

4
Connect an RF cable
between the ANT OUT
terminal on the cable
box and the B–IN
terminal on the A/B
switch.
5
Connect another
cable between the
other OUT terminal on
the splitter and the
A–IN terminal on the
RF (A/B) switch.
6
Connect the last
RF cable between the
OUT terminal on the
RF (A/B) switch and
the ANT IN terminal on
the rear of the TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
English- 10
C O N N E C T I O N S
2
Connect this cable
to a two-way splitter.
3
Connect an RF cable
between an OUTPUT
terminal on the splitter
and the IN terminal on
the cable box.
Incoming
cable
Splitter
Incoming
cable
Splitter
Cable Box
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
TV Rear
ANT IN
BN68-00883A-00Eng.qxd 3/9/05 11:04 AM Page 10