Samsung LNR237WX-XAP - Manual (Page 16)

English- 11
C O N N E C T I O N S
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 7-10).
Skip step 1 if you have not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the
back of the TV.
2
Connect the cable or
antenna to the
ANT IN terminal on the
back of the VCR.
3
Connect an RF cable
between the ANT OUT
terminal on the VCR
and the ANT IN terminal
on the TV.
VCR Rear Panel
TV Rear Panel
RF Cable
VCR Rear Panel
Incoming Cable
or Antenna
BN68-00883A-00Eng.qxd 3/9/05 11:04 AM Page 11