Samsung LNR237WX-XAP - Manual (Page 78)

English- 73
F U N C T I O N D E S C R I P T I O N
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue Screen”
mode to “Off”.
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Blue Screen”, then press
the ENTER
button.
3
Press the UP/DOWN
buttons to set Blue Screen
“On”.
Press the EXIT button
to exit.
BN68-00883A-00Eng.qxd 3/9/05 11:07 AM Page 73