Samsung EC-HZ50WZBPBUS - Manual (Page 61)

060
Image Stabilization
This feature minimizes camera shake when
you take a picture.
[OIS] ( ) : Performs optical image stabilization.
[DUAL IS] ( ) : Performs optical image stabilization and digital image
stabilization simultaneously.
Ŷ Things to watch out for when using the DUAL IS mode
– The digital zoom will not operate in the DUAL IS mode.
–
If the lighting conditions are brighter than fl uorescent lighting condi-
tions, the DUAL IS will not activate.
– If the lighting conditions are darker than fl uorescent lighting conditions,
camera shake warning indicator ( ) appears. For best results only
take pictures in situations where the camera does not display the
camera shake warning indicator ( ).
– If the subject is moving, the captured image may be blurred.
–
As the DUAL IS uses the camera’s digital signal processor, it may take
a little longer for the camera to process and save the images.
å OIS function may not work suffi ciently in the following cases:
- When you are taking pictures of a moving subject.
- When you are taking pictures at higher zoom magnifi cations.
- When camera shake is beyond the camera-shake correction
range.
- When the shutter speed is slow.
- When the battery is low.
å If you operate the OIS function using a tripod, the vibration of of
OIS sensor can blur pictures. Turn off the OIS function when you
use a tripod.
å If the camera is struck or dropped, the LCD screen can be affected.
To make the camera function properly again, turn it off and on.
Shooting ( )
Image Stabiliser
Back Move