Samsung SPK4215MX-XAC - Manual (Page 58)

Using RS 232C cable (optional)
58
A RS 232C cable is not included with the monitor. (The separately sold RS 232C cable is required)
As shown on the screen, PDP Remote Controller is used to control the PDP, Controls are made the PDP
Remote Control pad shown in diagram. Program disk is provided with your PDP monitor.
Supported Operating Systems
• Window 98 (including Second Edition)
• Window Me
• Window NT 4.0
• Window 2000
Installation Procedures
1 Connect RS-232C cable (optional) to the PC and monitor’s RS 232C input port.
2 Start your computer. If you have any application programs running, close them now.
3 Insert the floppy in the floppy drive. Run the PDP.EXE.
PDP Remote Controller menu
ΠTo select the input source, click the drop-down box.
´ To change the brightness and contrast, drag the control bar.
ˇ To select the screen mode, click the drop-down box.
¨ To control these functions, click the buttons.
(The video mute is screen off)
ˆ To active the Power ON/OFF Dates, adjust the time and
check the box.
Note
• The remote control doesn’t operate when connecting
your PDP monitor to RS-232C.
Œ
´
ˇ
¨
ˆ
AA68-01689A-4 4/12/05 10:52 AM Page 58