Samsung SPK4215MX-XAC - Manual (Page 64)

Troubleshooting
64
Problem
Poor picture
The power indicator is amber
blinking
Your Remote control does not
operate the monitor
The monitor won’t turn on
There is no screen image
The image is too light or
too dark
The image is too large or
too small
Before you call a service technician, please scan this list of problems and possible solutions. It may save you
time and money.
Possible Solution
Check all wire connections.
The monitor is using its power management system.
Check the power management utility on your computer.
Press the “Mode” button to put your remote control in the
“Monitor” mode.
Make sure the wall outlet is working.
Check to see that both the monitor and the source are plugged
in and turned on.
Adjust the Brightness or Contrast settings.
Adjust the Size settings.
AA68-01689A-4 4/12/05 10:52 AM Page 64