Samsung SPH-M100SS-XAR - Manual (Page 118)

Section 14
110 Using the Voice Services of your Sprint PCS Phone
Placing a call using voice dialing
To place a call using voice dialing:
1. Press and hold or open the phone (if set in the
main menu).
2. At the voice prompt, say the name into the phone.
ᮣ
The phone places the call if it recognizes the name.
ᮣ
If the phone does not recognize the name, it prompts
for the name again.
ᮣ
If the phone is unable to recognize the name after two
attempts, it says “
The name cannot be recognized. ”
and the following message displays: “ Cannot recognize
name. Please check name. ”. The phone returns to
Standby mode automatically, and you can try the call
again later.
Reviewing voice dialing entries
To review voice dialing entries:
1. From the main menu press for Voice Dial .
2. Press for Review . A list of your stored voice dial
numbers display (the names also display if stored in the
Internal Phone Book).
3. Press the digit key to select the desired entry or scroll to
the desired entry and press
. The recorded name
plays audibly. You can quickly scroll entries without
having to listen to each one, or you can listen to them
all as they play in order.
4. Press to return to the previous screen.
Erasing voice dialing entries
To erase an individual voice dialing entry:
1. From the main menu press for Voice Dial .
2. Press for Review . A list of entries displays.
3. Press the digit key to select the desired entry, or
highlight the desired entry and press
. The recorded
name plays audibly and you are prompted with
“
OK: Erase ”.